Editing A User Account; Filtering Event Notifications For A User - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

Editing a user account

NOTE
You must have the User Management privilege to perform this task.
To edit a user, complete the following steps.
1. Select Server > Users.
2. Select the user whose information you want to edit in the Users table.
3. Click Edit.
4. Edit the information as necessary.
5. Click OK to save your changes and close the Edit User dialog box.
6. Click OK on the message.
7.

Filtering event notifications for a user

The application provides notification of many different types of SAN events. If a user only wants to
receive notification of certain events, you can filter the events specifically for that user.
NOTE
The e-mail filter in the Management application is overridden by the firmware e-mail filter. When the
firmware determines that certain events do not receive e-mail notification, an e-mail is not sent for
those events even when the event type is added to the Selected Events table in the Define Filter
dialog box.
To configure event notifications for a user, complete the following steps.
1. Select Server > Users.
2. Select a user and click Edit in the Users table.
3. Select the E-Mail Notification Enable check box and click the Filter link.
DCFM Professional Plus User Manual
53-1001774-01
The Server Users dialog box displays.
The Edit User dialog box displays.
The edited information displays on the Server Users dialog box.
Click OK to close the Server Users dialog box.
The Server Users dialog box displays.
The Edit User dialog box displays.
The Define Filter dialog box displays
events of which this user is notified. The Available Events table includes all other events.
(Figure 100). The Selected Events table includes the
13
325