Brocade Communications Systems Brocade BladeSystem 4/24 User Manual page 287

4. Configure a date and time-based filter by choosing one of the following options:
5. Click the Exclude Events tab and complete the following steps.
FIGURE 91
DCFM Professional Plus User Manual
53-1001774-01
b. Select the event column for the event from the Event Column list.
All event columns are listed in alphabetical order.
c. Enter all or part of the event type value in the Value Contains text box.
d. Click the right arrow button to move the event type to the Additional Filters - Include these
Events table.
To add additional filters, repeat steps a through d.
NOTE
You can configure a maximum of 10 filters to be included.
To remove a filter from the Additional Filters - Include these Events table, refer to
"Removing an advanced event filter"
NOTE
The date and time-based filter fields do not display unless there is at least one advanced filter
in the Additional Filters - Include these Events table.
•
To set a duration for the filters, select Last and choose how long to filter the events from
the list. Options include All, 1 hour, 2 hours, 12 hours, and 24 hours.
•
To set a specific date and time for the filters, select Between and enter a start and end
time in the appropriate fields.
Advanced Event Filtering dialog box - Include Events tab
a. Select the event type you want to remove from the Event Type list.
All event types are listed in alphabetical order.
b. Enter all or part of the event type description text in the Description Contains text box (up
to 40 characters).
This text should be the same text that displayed in the Description field for the events that
displayed on the Master Log.
on page 255.
10
253