Using The Hp Ipaq Gps Bluetooth Receiver; Learning About Bluetooth Gps Features - HP 348773-001 User Manual

Using the HP iPAQ GPS Bluetooth Receiver

The HP iPAQ Navigation System Bluetooth GPS receiver gets GPS signals from satellites orbiting
the earth. It identifies your position to an accuracy of less than 10 meters.
The HP iPAQ Navigation System Bluetooth GPS receiver is referred to as
the Bluetooth GPS receiver in this User's Guide.

Learning About Bluetooth GPS Features

An illustration of the Bluetooth GPS receiver with features follows.
Feature
Power Switch
Power Jack
Bluetooth Status
LED (Blue)
GPS Status LED
(Green)
Battery Status LED
(Red/Yellow)
External Antenna
User's Guide
Power Jack
Power is On or Off.
The Power Jack connects a DC car power charger (included) or
AC power charger to recharge the internal battery.
Blinking Slowly - There is not a Bluetooth connection.
Blinking Quickly - There is a connection to another Bluetooth
receiver.
Blinking - The GPS position is fixed.
Steady Light - The GPS position is not fixed.
Red - Battery power is extremely low. Charge immediately.
Yellow - Battery is currently charging.
LED Off - Battery is partially or fully charged.
Connects an external antenna. This is usually not required since
the GPS has an internal antenna.
Learning About Bluetooth GPS Features
External Antenna
Description
2-1