Display Interface - HP 6125XLG Command Reference Manual

Field
Total (pkts/sec)
Broadcast (pkts/sec)
Multicast (pkts/sec)
Overflow: More than 14
digits
--: Not supported
Related commands
• flow-interval
reset counters interface
•

display interface

Use display interface to display Ethernet interface information.
Syntax
display interface [ interface-type [ interface-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type: Specifies an interface type.
interface-number: Specifies an interface number.
Usage guidelines
If no interface type is specified, this command displays information about all interfaces.
If an interface type is specified but no interface number is specified, this command displays information
about all interfaces of that type.
If both the interface type and interface number are specified, this command displays information about
the specified interface.
Examples
# Display detailed information about interface Ten-GigabitEthernet 1/1/5.
<Sysname> display interface ten-gigabitethernet 1/1/5
Ten-GigabitEthernet1/1/5 current state: DOWN
Line protocol current state: DOWN
IP Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 00e0-fc00-584c
Description: Ten-GigabitEthernet1/1/5 Interface
Description
Average rate (in pps) of receiving or sending packets during the statistics
polling interval.
Average rate (in pps) of receiving or sending broadcast packets during the
statistics polling interval.
Average rate (in pps) of receiving or sending multicast packets during the
statistics polling interval.
The command displays Overflow if the data length of a statistical item is
greater than 14 decimal digits.
The statistical item is not supported.
6