lldp fast-count
Use lldp fast-count to set the number of LLDPDUs sent each time fast LLDPDU transmission is triggered.
Use undo lldp fast-count to restore the default.
Syntax
lldp fast-count count
undo lldp fast-count
Default
The number is 3.
Views
System view
Predefined user roles
network-admin
Parameters
count: Sets the number of LLDPDUs sent each time fast LLDPDU transmission is triggered. The value range
is 1 to 10.
Usage guidelines
When fast LLDPDU transmission is enabled, the device shortens the LLDPDU transmit interval to 1 second
and restores it to the normal value after sending a certain number of LLDPDUs in succession. That number
can be changed by using this command.
Examples
# Configure the device to send four LLDPDUs each time fast LLDPDU transmission is triggered.
<Sysname> system-view
[Sysname] lldp fast-count 4
lldp global enable
Use lldp global enable to enable LLDP globally.
Use undo lldp global enable to disable LLDP globally.
Syntax
lldp global enable
undo lldp global enable
Default
If the switch starts up with empty configuration, LLDP is disabled globally (initial setting).
If the switch starts up with the default configuration file, LLDP is enabled globally (factory default).
For more information about empty configuration and the default configuration file, see Fundamentals
Configuration Guide.
Views
System view
195