Display Interface Brief - HP 6125XLG Command Reference Manual

Field
buffer failures
aborts
deferred
collisions
late collisions
lost carrier
no carrier
Related commands
reset counters interface

display interface brief

Use display interface brief to display brief Ethernet interface information.
Syntax
display interface [ interface-type [ interface-number ] ] brief [ description ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type: Specifies an interface type.
interface-number: Specifies an interface number.
description: Displays the full description of the specified interface. If the keyword is not specified, the
command displays at most the first 27 characters of the interface description. If the keyword is specified,
the command displays all characters of the interface description.
Usage guidelines
If no interface type is specified, this command displays information about all interfaces.
If an interface type is specified but no interface number is specified, this command displays information
about all interfaces of that type.
Description
The number of packets dropped because the transmit buffer of the
interface ran low.
The number of packets that failed to be transmitted, for example,
because of Ethernet collisions.
The number of frames that the interface deferred to transmit
because of detected collisions.
The number of frames that the interface stopped transmitting
because Ethernet collisions were detected during transmission.
The number of frames that the interface deferred to transmit after
transmitting their first 512 bits, because of detected collisions.
The number of carrier losses during transmission. This counter
increments by 1 when a carrier is lost, and applies to serial WAN
interfaces.
The number of times that the port failed to detect the carrier when
attempting to send frames. This counter increments by 1 when a
port failed to detect the carrier, and applies to serial WAN
interfaces.
11