Interface; Jumboframe Enable - HP 6125XLG Command Reference Manual

<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/1/5
[Sysname-Ten-GigabitEthernet1/1/5] flow-interval 100

interface

Use interface to enter interface view.
Syntax
interface interface-type interface-number
Views
System view
Predefined user roles
network-admin
Parameters
interface-type: Specifies an interface type.
interface-number: Specifies an interface number.
Examples
# Enter Ten-GigabitEthernet 1/1/5 interface view.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/1/5
[Sysname-Ten-GigabitEthernet1/1/5]

jumboframe enable

Use jumboframe enable to allow jumbo frames within the specified length to pass through.
Use undo jumboframe enable to prevent jumbo frames from passing through.
Syntax
jumboframe enable [ value ]
undo jumboframe enable
Default
The device allows jumbo frames within 10000 bytes to pass through.
Views
Ethernet interface view
Predefined user roles
network-admin
Parameters
value: Sets the maximum length of Ethernet frames that are allowed to pass through. The value range for
this argument is 1536 to 10000 bytes.
Usage guidelines
If you set the value argument multiple times, the most recent configuration takes effect.
19