Name - HP 6125XLG Command Reference Manual

Examples
# Set the MTU to 1492 bytes for VLAN-interface 1.
<Sysname> system-view
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] mtu 1492
Related commands
display interface vlan-interface

name

Use name to configure a name for the VLAN.
Use undo name to restore the default name of the VLAN.
Syntax
name text
undo name
Default
The name of a VLAN is VLAN vlan-id, which specifies the ID of the VLAN. For example, the name of
VLAN 100 is VLAN 0100.
Views
VLAN view
Predefined user roles
network-admin
Parameters
text: Specifies a VLAN name, a string of 1 to 32 characters. The string can include case-sensitive letters,
digits, special characters such as tilde (~), exclamation point (!), at sign (@), pound sign (#), dollar sign
($), percent sign (%), caret (^), ampersand sign (&), asterisk (*), left brace ({), right brace (}), left
parenthesis ((), right parenthesis ()), left bracket ([), right bracket (]), left angle bracket (<), right angle
bracket (>), hyphen (-), underscore(_), plus sign (+), equal sign (=), vertical bar (|), back slash (\), colon
(:), semi-colon (;) quotation marks ("), apostrophe ('), comma (,), dot (.), and slash (/), spaces, and other
Unicode characters and symbols.
Usage guidelines
You can use VLAN names, rather than VLAN IDs, to distinguish a large number of VLANs.
Examples
# Configure the name of VLAN 2 as test vlan.
<Sysname> system-view
[Sysname] vlan 2
[Sysname-vlan2] name test vlan
Related commands
display vlan
151