Lldp Hold-Multiplier - HP 6125XLG Command Reference Manual

Predefined user roles
network-admin
Usage guidelines
LLDP takes effect only when LLDP is enabled both globally and on the port.
Examples
# Disable LLDP globally.
<Sysname> system-view
[Sysname] undo lldp global enable
Related commands
lldp enable

lldp hold-multiplier

Use lldp hold-multiplier to set the TTL multiplier.
Use undo lldp hold-multiplier to restore the default.
Syntax
lldp hold-multiplier value
undo lldp hold-multiplier
Default
The TTL multiplier is 4.
Views
System view
Predefined user roles
network-admin
Parameters
value: Sets the TTL multiplier in the range of 2 to 10.
Usage guidelines
The TTL TLV carried in an LLDPDU determines how long the device information carried in the LLDPDU can
be saved on a recipient device.
By setting the TTL multiplier, you can configure the TTL of locally sent LLDPDUs, which determines how
long information about the local device can be saved on a neighboring device. The TTL is expressed by
using the following formula:
TTL = Min (65535, (TTL multiplier × LLDPDU transmit interval))
As the expression shows, the TTL can be up to 65535 seconds.
Examples
# Set the TTL multiplier to 6.
<Sysname> system-view
[Sysname] lldp hold-multiplier 6
196