Display Interface Loopback - HP 6125XLG Command Reference Manual

Views
Loopback interface view, null interface view
Predefined user roles
network-admin
Parameters
text: Specifies an interface description, a string of 1 to 80 characters.
Usage guidelines
Configure a description for an interface for easy identification and management purposes.
You can use the display interface command to view the configured description.
Examples
# Set the description to for RouterID for interface loopback 1.
<Sysname> system-view
[Sysname] interface loopback 1
[Sysname-LoopBack1] description for RouterID

display interface loopback

Use display interface loopback to display information about the specified or all existing loopback
interfaces.
Syntax
display interface [ loopback [ interface-number ] ] [ brief [ description ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-number: Specifies a loopback interface by its number, which can be the number of any existing
loopback interface. If you do not specify this argument, the command displays information about all
existing loopback interfaces on the device.
brief: Displays brief interface information. If you do not specify this keyword, the command displays
detailed interface information.
description: Displays the full description of the specified interface. When the keyword is not specified,
only the first 27 characters of an interface description are displayed if the interface description is longer
than 27 characters. When the keyword is specified, all characters of the interface description are
displayed.
Usage guidelines
This command is supported only after a loopback interface is created.
If the loopback keyword is not specified, the command displays information about all interfaces of the
device.
36