HP 6125XLG Command Reference Manual page 83

Syntax
display link-aggregation verbose [ bridge-aggregation [ interface-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
bridge-aggregation: Displays detailed information about the aggregation groups that correspond to
aggregate interfaces.
interface-number: Specifies an existing aggregate interface number.
Usage guidelines
To display information about a specific aggregation group, use the display link-aggregation verbose
bridge-aggregation interface-number command.
To display information about all aggregation groups, use the display link-aggregation verbose
bridge-aggregation command.
To display information about all aggregation groups, use the display link-aggregation verbose
command.
The bridge-aggregation keyword is available only after you create aggregate interfaces on the device.
Examples
# Display detailed information about the aggregation group that corresponds to aggregate interface
Bridge-Aggregation 10, which is a dynamic aggregation group.
<Sysname> display link-aggregation verbose bridge-aggregation 10
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Port Status: S -- Selected, U -- Unselected
Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
Aggregate Interface: Bridge-Aggregation10
Aggregation Mode: Dynamic
Loadsharing Type: Shar
System ID: 0x8000, 000f-e267-6c6a
Local:
Port
--------------------------------------------------------------------------------
XGE1/1/5
XGE1/1/6
Remote:
Actor
--------------------------------------------------------------------------------
XGE1/1/5
XGE1/1/6
Status Priority Oper-Key
S 32768
S 32768
Partner Priority Oper-Key
32 32768
26 32768
Flag
2 {ACDEF}
2 {ACDEF}
SystemID
2 0x8000, 000f-e267-57ad {ACDEF}
2 0x8000, 000f-e267-57ad {ACDEF}
76
Flag