HP 6125XLG Command Reference Manual page 184

Blade switch layer 2 - lan switching
Table of Contents

Advertisement

Field
Port ID type
Port ID
Management address interface
type
Management address interface
ID
Management address OID
Port VLAN ID(PVID)
Port and protocol VLAN ID(PPVID)
Port and protocol VLAN
supported
Port and protocol VLAN enabled
VLAN name of VLAN 1
Oper version
Sequence number
Acknowledge number
DCBX ETS subTLV info
Percentage
DCBX PFC subTLV info
P0-0 P1-0 P2-1 P3-1 P4-0
P5-0 P6-0 P7-0
Number of traffic classes
supported
DCBX APP subTLV info
ID type
Protocol ID
CoS map
Auto-negotiation supported
Auto-negotiation enabled
OperMau
Description
Port ID type:
MAC address.
Interface name.
Port ID, the value of which depends on the port ID type.
Numbering type of the interface identified by the management address.
Index of the interface identified by the management address.
Management address object ID.
Port VLAN ID.
Port protocol VLAN ID.
Indicates whether protocol VLAN is supported on the port.
Indicates whether protocol VLAN is enabled on the port.
Name of VLAN 1.
DCBX version number.
Number of DCBX TLV content changes.
Times of synchronizing configurations by the peer device.
CoS-to-local priority mapping and bandwidth allocation.
Parentage of bandwidth allocated.
Indicates whether PFC is enabled.
Indicates whether PFC is enabled for each 802.1p priority on the local
end:
1—Enabled.
0—Disabled.
Capability set supported by PFC (displayed only in Rev 1.01).
Application protocol-to-CoS mapping.
This field is not displayed, and only the following CoS map information is
displayed in DCBX Rev 1.00.
Application protocol number type:
APP protocol.
TCP or UDP port.
Application protocol number.
Application protocol-to-CoS mapping.
Indicates whether autonegotiation is supported on the port.
Indicates whether autonegotiation is enabled on the port.
Speed and duplex state of the port.
177

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents