Stp Priority - HP 6125XLG Command Reference Manual

instance instance-list: Specifies the MSTIs by an instance list, in the format of instance-list = { instance-id
[ to instance-id ] }&<1- 1 0>, where &<1- 1 0> indicates that you can specify up to 10 instances or instance
ranges. The value range for the instance-id argument is 0 to 4094, and the value 0 represents the CIST.
Examples
# In MSTP mode, enable outputting port state transition information for MSTI 2.
<Sysname> system-view
[Sysname] stp port-log instance 2
%Aug 16 00:49:41:856 2011 Sysname MSTP/3/MSTP_DISCARDING: Instance 2's port FortyGigE1/1/1
has been set to discarding state.
%Aug 16 00:49:41:856 2011 Sysname MSTP/3/MSTP_FORWARDING: Instance 2's port FortyGigE1/1/2
has been set to forwarding state.
The output shows that FortyGigE 1/1/1 in MSTI 2 transited to the discarding state and FortyGigE 1/1/2
in MSTI 2 transited to the forwarding state.

stp priority

Use stp priority to set the priority of the device.
Use undo stp priority to restore the default priority.
Syntax
stp [ instance instance-list ] priority priority
undo stp [ instance instance-list ] priority
Default
The device priority is 32768.
Views
System view
Predefined user roles
network-admin
Parameters
instance instance-list: Sets the priority of the device in the MSTIs that are specified by an instance list, in
the format of instance-list = { instance-id [ to instance-id ] }&<1- 1 0>, where &<1- 1 0> indicates that you
can specify up to 10 instances or instance ranges. The value range for the instance-id argument is 0 to
4094, and the value 0 represents the CIST.
priority: Specifies the device priority in the range of 0 to 61440 in increments of 4096 (as in 0, 4096,
8192). You can set up to 16 priority values on the device. The smaller the value, the higher the device
priority.
Examples
# In MSTP mode, set the device priority to 4096 in MSTI 1.
<Sysname> system-view
[Sysname] stp instance 1 priority 4096
127