Using Tengige - HP 6125XLG Command Reference Manual

using tengige

Use using tengige to split a 40-GE interface into four 10-GE interfaces.
Use undo using tengige to cancel the configuration.
Syntax
using tengige
undo using tengige
Default
A 40-GE interface is used as a single interface, and it will not be automatically split.
Views
40-GE interface view
Predefined user roles
network-admin
Usage guidelines
To improve port density, reduce costs, and improve network flexibility, you can split a 40-GE interface
into four 10-GE interfaces. For example, you can split a 40-GE interface FortyGigE 1/1/1 into four
10-GE interfaces Ten-GigabitEthernet 1/1/1:1 through Ten-GigabitEthernet 1/1/1:4. The 10-GE
interfaces that are split from a 40-GE interface support the same configuration and attributes as common
10-GE interfaces, except that they are numbered differently.
After the configuration, the system prompts you to reboot your device. You must reboot the device to see
the four 10-GE interfaces.
Examples
# Split 40-GE interface FortyGigE 1/1/1 into four 10-GE interfaces.
<System> system-view
[System] interface fortygige 1/1/1
[System-FortyGigE1/1/1] using tengige
The interface FortyGigE1/1/1 will be deleted. Continue? [Y/N]:y
Reboot device to make the configuration take effect.
Related commands
using fortygige
34