Display Lacp System-Id - HP 6125XLG Command Reference Manual

Field
Link: ADM - administratively down; Stby - standby
Speed or Duplex: (a)/A - auto; H - half; F - full
Type: A - access; T - trunk; H - hybrid
Interface
Link
Speed

display lacp system-id

Use display lacp system-id to display the system ID of the local system.
Syntax
display lacp system-id
Views
Any view
Predefined user roles
network-admin
network-operator
Usage guidelines
You can use the lacp system-priority command to change the LACP priority of the local system. You
specify the LACP priority value in decimal format in the lacp system-priority command, but it is displayed
as a hexadecimal value by the display lacp system-id command.
Examples
# Display the local system ID.
<Sysname> display lacp system-id
Actor System ID: 0x8000, 0000-fc00-6504
Description
Link status:
•
ADM—The interface has been administratively
shut down. To recover its physical layer state, run
the undo shutdown command.
•
Stby—The interface is operating as a backup
interface.
If the speed of an interface is automatically
negotiated, its speed attribute includes the
autonegotiation flag, indicated by the letter a in
parentheses.
If the duplex mode of an interface is automatically
negotiated, its duplex mode attribute includes the
autonegotiation flag, indicated by the letter a in
parentheses or a capital A. The letter H indicates the
half duplex mode, and the letter F indicates the full
duplex mode.
Link type options for Ethernet interfaces.
Abbreviated interface name.
Physical link state of the interface.
Interface speed, in bps.
70