Lldp Tlv-Enable - HP 6125XLG Command Reference Manual

Blade switch layer 2 - lan switching
Table of Contents

Advertisement

[Sysname] lldp timer tx-interval 20
Related commands
lldp timer tx-delay

lldp tlv-enable

Use lldp tlv-enable to configure the types of advertisable TLVs.
Use undo lldp tlv-enable to disable the advertising of specific types of TLVs.
Syntax
lldp tlv-enable { basic-tlv { all | management-address-tlv [ ip-address ] | port-description |
system-capability | system-description | system-name } | dot1-tlv { all | dcbx | port-vlan-id |
protocol-vlan-id [ vlan-id ] | vlan-name [ vlan-id ] } | dot3-tlv { all | link-aggregation | mac-physic |
max-frame-size | power } | med-tlv { all | capability | inventory | location-id { civic-address
device-type country-code { ca-type ca-value }&<1- 1 0> | elin-address tel-number } | network-policy |
power-over-ethernet } }
undo lldp tlv-enable { basic-tlv { all | management-address-tlv [ ip-address ] | port-description |
system-capability | system-description | system-name } | dot1-tlv { all | dcbx | port-vlan-id |
protocol-vlan-id [ vlan-id ] | vlan-name [ vlan-id ] } | dot3-tlv { all | link-aggregation | mac-physic |
max-frame-size | power } | med-tlv { all | capability | inventory | location-id | network-policy |
power-over-ethernet } }
Default
The device can advertise on a Ethernet port all types of LLDP TLVs except DCBX TLVs, location
identification TLVs, VLAN name TLVs, and protocol VLAN ID TLVs.
Views
Ethernet interface view
Predefined user roles
network-admin
Parameters
all: Advertises all basic LLDP TLVs, IEEE 802.1 organizationally specific LLDP TLVs, or IEEE 802.3
organizationally specific LLDP TLVs when the all keyword is specified for basic-tlv, dot1-tlv, or dot3-tlv; or
advertises all LLDP-MED TLVs except location identification TLVs when the all keyword is specified for
med-tlv.
basic-tlv: Advertises basic LLDP TLVs.
management-address-tlv [ ip-address ]: Advertises management address TLVs. ip-address specifies the
management address to be advertised. By default, the management address is the main IP address of the
VLAN interface that is in up state and whose corresponding VLAN ID is the lowest among the VLANs
permitted on the port. If none of the VLAN interfaces of the permitted VLANs is assigned an IP address
or all VLAN interfaces are down, no management address will be advertised.
port-description: Advertises port description TLVs.
system-capability: Advertises system capabilities TLVs.
system-description: Advertises system description TLVs.
system-name: Advertises system name TLVs.
201

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents