HP 6125XLG Command Reference Manual page 80

Usage guidelines
For a member port in a static aggregation group, which is unaware of information about the peer group,
this command displays the port number, port priority, and operational key of the local end only.
Examples
# Display detailed link aggregation information for Ten-GigabitEthernet 1/1/5, which is a member port
of a static aggregation group.
<Sysname> display link-aggregation member-port ten-gigabitethernet 1/1/5
Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
Ten-GigabitEthernet1/1/5:
Aggregate Interface: Bridge-Aggregation1
Port Number: 25
Port Priority: 32768
Oper-Key: 1
# Display detailed link aggregation information for Ten-GigabitEthernet 1/1/6, which is a member port
of a dynamic aggregation group.
<Sysname> display link-aggregation member-port ten-gigabitethernet 1/1/6
Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
Ten-GigabitEthernet1/1/6:
Aggregate Interface: Bridge-Aggregation10
Local:
Port Number: 26
Port Priority: 32768
Oper-Key: 2
Flag: {ACDEF}
Remote:
System ID: 0x8000, 000f-e267-6c6a
Port Number: 26
Port Priority: 32768
Oper-Key: 2
Flag: {ACDEF}
Received LACP Packets: 5 packet(s)
Illegal: 0 packet(s)
Sent LACP Packets: 7 packet(s)
73