Revision-Level - HP 6125XLG Command Reference Manual

Syntax
reset stp [ interface interface-list ]
Views
User view
Predefined user roles
network-admin
Parameters
interface interface-list: Clears the MSTP statistics information of the ports that are specified in the format
of interface-list = { interface-type interface-number [ to interface-type interface-number ] }&<1- 1 0>, where
&<1- 1 0> indicates that you can specify up to 10 ports or port ranges. If you don't specify this option, this
command clears the spanning tree-related statistics information on all ports.
Examples
# Clear the spanning tree-related statistics on ports FortyGigE 1/1/1 through FortyGigE 1/1/3.
<Sysname> reset stp interface fortygige 1/1/1 to fortygige 1/1/3
Related commands
display stp

revision-level

Use revision-level to configure the MSTP revision level.
Use undo revision-level to restore the default MSTP revision level.
Syntax
revision-level level
undo revision-level
Default
The MSTP revision level is 0.
Views
MST region view
Predefined user roles
network-admin
Parameters
level: Specifies an MSTP revision level in the range of 0 to 65535.
Usage guidelines
The MSTP revision level, the MST region name, and the VLAN-to-instance mapping table of a device
determine the device's MST region. When the MST region name and VLAN-to-instance mapping table
are both the same for two MST regions, they can still be differentiated by their MSTP revision levels.
After configuring this command, run the active region-configuration command to activate the configured
MST region level.
111