Display Storm-Constrain - HP 6125XLG Command Reference Manual

display storm-constrain

Use display storm-constrain to display storm control settings and statistics.
Syntax
display storm-constrain [ broadcast | multicast | unicast ] [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
broadcast: Displays broadcast storm control settings and statistics.
multicast: Displays multicast storm control settings and statistics.
unicast: Displays unknown unicast storm control settings and statistics.
interface interface-type interface-number: Specifies an interface by its type and number.
Usage guidelines
If you specify no argument or keyword, this command displays all storm control settings on all storm
control-enabled interfaces.
Examples
# Display the storm control settings on all storm control-enabled ports.
<Sysname> display storm-constrain
Abbreviation: BC - broadcast; MC - multicast; UC - unicast
Flow Statistic Interval: 11 (in seconds)
Port
--------------------------------------------------------------------------------
XGE1/1/5
XGE1/1/6
XGE1/1/7
Table 6 Command output
Field
Flow Statistic Interval
Port
Type
Lower
Upper
FW - forwarding
Type Lower Upper
UC 150 220
BC 1500 2000
MC 15 80
Description
Traffic polling interval (in seconds) of the storm control module.
Abbreviated port name.
Type of traffic subjected to storm control:
•
BC—Broadcast packets.
•
MC—Multicast packets.
•
UC—Unknown unicast packets.
Lower storm control threshold, in pps, kbps, or percentage.
Upper storm control threshold, in pps, kbps, or percentage.
Unit CtrlMode Status
pps block FW
kbps N/A FW
% N/A FW
15
Trap Log SwitchNum
on on 0
on on 0
on on 0