Port Isolation Commands; Display Port-Isolate Group; Port-Isolate Enable - HP 6125XLG Command Reference Manual

Port isolation commands

display port-isolate group

Use display port-isolate group to display port isolation group information.
Syntax
display port-isolate group [ group-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group-number: Specifies an isolation group by its number in the range of 1 to 8.
Examples
# Display all isolation groups.
<Sysname> display port-isolate group
Port isolation group information:
Group ID: 2
Group members:
Ten-GigabitEthernet1/1/5
Group ID: 5
Group members:
Ten-GigabitEthernet1/1/6
Ten-GigabitEthernet1/1/7
Table 19 Command output
Field
Group ID
Group members
Related commands

port-isolate enable

port-isolate enable
Use port-isolate enable to assign a port to an isolation group.
Use undo port-isolate enable to remove a port from an isolation group.
Description
Isolation group number.
Isolated ports in the isolation group.
91