HP 6125XLG Command Reference Manual page 153

Syntax
display interface vlan-interface [ vlan-interface-id ] [ brief [ description ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vlan-interface-id: Specifies a VLAN interface number. If you do not specify this argument, this command
displays information about all VLAN interfaces.
brief: Displays brief interface information. If you do not specify this keyword, the command displays
detailed interface information.
description: Displays the full description of the specified interface. If the keyword is not specified, the
command displays at most the first 27 characters of the interface description. If the keyword is specified,
the command displays all characters of the interface description.
Examples
# Display information for VLAN interface 10.
<Sysname> display interface vlan-interface 10
Vlan-interface10 current state: UP
Line protocol current state: UP
Description: Vlan-interface10 Interface
The Maximum Transmit Unit is 1500
Internet Address is 192.168.1.54/24 Primary
IP Packet Frame Type:PKTFMT_ETHNT_2,
IPv6 Packet Frame Type:PKTFMT_ETHNT_2,
Last clearing of counters:
# Display brief information for VLAN interface 2.
<Sysname> display interface vlan-interface 2 brief
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface
Vlan2
Hardware Address: 0023-89b6-d613
Never
Link Protocol Main IP
DOWN DOWN --
146
Hardware Address: 0023-89b6-d613
Description