Interface Bridge-Aggregation - HP 6125XLG Command Reference Manual

Field
System ID
Local
Remote

interface bridge-aggregation

Use interface bridge-aggregation to create an aggregate interface and enter the aggregate interface
view.
Use undo interface bridge-aggregation to remove an aggregate interface.
Syntax
interface bridge-aggregation interface-number
undo interface bridge-aggregation interface-number
Default
No aggregate interface is created.
Views
System view
Predefined user roles
network-admin
Parameters
interface-number: Specifies an aggregate interface number in the range of 1 to 1024.
Usage guidelines
When you create an aggregate interface, the system automatically creates an aggregation group with
the same number, which operates in static aggregation mode by default.
If you remove the aggregate interface, you also remove the aggregation group, and any member ports
leave the aggregation group.
Description
Local system ID, comprising the system LACP priority and the system MAC address.
Information about the local end:
•
Port—Port type and number.
•
Status—Selected or Unselected state of the port.
•
Priority—Port priority.
•
Oper-Key—Operational key.
•
Flag—LACP state flag.
NOTE:
For static aggregation groups, only local information (without the Flag field) is
displayed.
Information about the remote end:
•
Actor—Port type and number of the local end.
•
Partner—Port index of the remote end.
•
Priority—Port priority of the remote end.
•
Oper-Key—Operational key of the remote port.
•
System ID—System ID of the remote end.
•
Flag—LACP state flag of the remote end.
78