reset packet-drop interface
Use reset packet-drop interface to clear the dropped packet statistics on an interface or multiple
interfaces.
Syntax
reset packet-drop interface [ interface-type [ interface-number ] ]
Views
User view
Predefined user roles
network-admin
Parameters
interface-type: Specify an interface type. If you do not specify an interface type, this command clears
dropped packet statistics on all the interfaces on the device.
interface-number: Specify an interface number. If you do not specify this argument, this command clears
dropped packet statistics on all interfaces of the specified type.
Examples
# Clear dropped packet statistics on Ten-GigabitEthernet 1/1/5.
<Sysname> reset packet-drop interface ten-gigabitethernet 1/1/5
# Clear dropped packet statistics on all interfaces.
<Sysname> reset packet-drop interface
Related commands
display packet-drop
shutdown
Use shutdown to shut down an Ethernet interface.
Use undo shutdown to bring up an Ethernet interface.
Syntax
shutdown
undo shutdown
Default
The uplink interfaces and the first 16 downlink 10-GE and GE interfaces are up.
•
When the switch starts up with empty configuration, the software defaults are used: the last four
•
downlink 10-GE interfaces are up. When the switch starts up with the default configuration file, the
factory defaults are used: the last four downlink 10-GE interfaces are down.
Views
Ethernet interface view
Predefined user roles
network-admin
26