Display Stp - HP 6125XLG Command Reference Manual

Configuration digest : 0x3ab68794d602fdf43b21c0b37ac3bca8
Instance
0
15
Table 20 Command output
Field
Format selector
Region name
Revision level
Instance VLANs Mapped
Related commands
• active region-configuration
instance
•
region-name
•
revision-level
•
vlan-mapping modulo
•

display stp

Use display stp to display the spanning tree status and statistics information. Based on the information,
you can analyze and maintain the network topology or determine whether the spanning tree is working
correctly.
Syntax
display stp [ instance instance-list ] [ interface interface-list | slot slot-number ] [ brief ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
instance instance-list: Displays the status and statistics information of the MSTIs that are specified by an
instance list, in the format of instance-list = { instance-id [ to instance-id ] }&<1- 1 0>, where &<1- 1 0>
indicates that you can specify up to 10 instances or instance ranges. The value range for the instance-id
argument is 0 to 4094, and the value 0 represents the CIST.
interface interface-list: Displays the spanning tree status and statistics on the ports that are specified by
a port list, in the format of interface-list = { interface-type interface-number [ to interface-type
interface-number ] }&<1- 1 0>, where &<1- 1 0> indicates that you can specify up to 10 ports or port
ranges.
VLANs Mapped
1, 3 to 4094
2
Description
Format selector of the MST region, which is 0 (not configurable).
MST region name.
Revision level of the MST region.
VLAN-to-instance mappings in the MST region.
96