HP 6125XLG Command Reference Manual page 19

If both the interface type and interface number are specified, this command displays information about
the specified interface.
Examples
# Display brief information about all interfaces.
<Sysname> display interface brief
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface
M-E0/0/0
NULL0
REG0
The brief information of interface(s) under bridge mode:
Link: ADM - administratively down; Stby - standby
Speed or Duplex: (a)/A - auto; H - half; F - full
Type: A - access; T - trunk; H - hybrid
Interface
FGE1/1/1
FGE1/1/2
FGE1/1/3
FGE1/1/4
XGE1/0/17
XGE1/0/18
XGE1/0/19
XGE1/0/20
# Display brief information about interface Ten-GigabitEthernet 1/1/5, including the full description of
the interface.
<Sysname> display interface ten-gigabitethernet 1/1/5 brief description
The brief information of interface(s) under bridge mode:
Link: ADM - administratively down
Speed or Duplex: (a)/A - auto; H - half; F - full
Type: A - access; T - trunk; H - hybrid
Interface
XGE1/1/5
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
Table 4 Command output
Field
The brief information of interface(s)
under route mode:
Link: ADM - administratively down;
Stby - standby
Link Protocol Main IP
UP UP 192.168.0.34
UP UP(s) --
DOWN DOWN --
Link Speed Duplex Type PVID Description
DOWN auto A
DOWN auto A
DOWN auto A
DOWN auto A
ADM 10G F
ADM 10G F
ADM 10G F
ADM 10G F
Link Speed Duplex Type PVID Description
UP 1000M(a) F(a)
Description
The command displays brief information about Layer 3 interfaces.
•
ADM—The interface has been shut down by the network
administrator. To recover its physical layer state, use the undo
shutdown command.
•
Stby—The interface is a standby interface.
12
Description
A 1
A 1
A 1
A 1
A 1
A 1
A 1
A 1
A 1 aaaaaaaaaaaaaaaaaaaaaaaaaaaaa