Sftp Ipv6 - HP 5920 Command Reference Manual
Hide thumbs
Also See for 5920:
- Command reference manual (607 pages) ,
- Configuration manual (424 pages) ,
- Fc and fcoe configuration manual (257 pages)
Table of Contents
Advertisement
The source address specified by the sftp client source command applies to all SFTP connections, but the
source address specifies by the sftp command applies only to the current connection.
Examples
# Specify the source IP address for the SFTP client as 192.168.0.1.
<Sysname> system-view
[Sysname] sftp client source ip 192.168.0.1
Related commands
display sftp client source
sftp ipv6
Use sftp ipv6 to connect an SFTP client to an IPv6 SFTP server and enter SFTP client view.
Syntax
In non-FIPS mode:
sftp ipv6 server [ port-number ] [ vpn-instance vpn-instance-name ] [ -i interface-type interface-number ]
[ identity-key { dsa | rsa } | prefer-compress zlib | prefer-ctos-cipher { 3des | aes128 | aes256 | des }
| prefer-ctos-hmac { md5 | md5-96 | sha1 | sha1-96 } | prefer-kex { dh-group-exchange | dh-group1
| dh-group14 } | prefer-stoc-cipher { 3des | aes128 | aes256 | des } | prefer-stoc-hmac { md5 |
md5-96 | sha1 | sha1-96 } ] * [ publickey keyname | source { interface interface-type interface-number
| ipv6 ipv6-address} ] *
In FIPS mode:
sftp ipv6 server [ port-number ] [ vpn-instance vpn-instance-name ] [ -i interface-type interface-number ]
[ identity-key { dsa | rsa } | prefer-compress zlib | prefer-ctos-cipher { aes128 | aes256 } |
prefer-ctos-hmac { sha1 | sha1-96 } | prefer-kex dh-group14 | prefer-stoc-cipher { aes128 | aes256 }
| prefer-stoc-hmac { sha1 | sha1-96 } ] * [ publickey keyname | source { interface interface-type
interface-number | ipv6 ipv6-addres} ] *
Views
User view
Predefined user roles
network-admin
Parameters
server: Specifies a server by its IPv6 address or host name, a case-insensitive string of 1 to 46 characters.
port-number: Specifies a port number of the server, in the range of 1 to 65535. The default is 22.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN that the server belongs to, where the
vpn-instance-name argument is a case-sensitive string of 1 to 31 characters.
-i interface-type interface-number: Specifies the outgoing interface used by the client to connect to the
server. The argument interface-type interface-number specified the outgoing interface by its type and
259
Advertisement
Table of Contents
