Configuration Steps - HP ProCurve 6120G/XG Configuration Manual

Monitoring and Analyzing Switch Operation
Traffic Mirroring

Configuration Steps

N o t e s
If mirroring has already been enabled on the switch, the Menu screens will
appear differently than shown in this section.
1. From the Main Menu, select:
Figure B-19. The Default Network Mirroring Configuration Screen
2. In the Actions menu, press
3. If mirroring is currently disabled for session 1 (the default), then enable
4. Press the down arrow key to display a screen similar to the following and
B-30
2. Switch Configuration...
3. Network Monitoring Port
Switch Configuration - Network Monitoring Port
Monitoring Enabled [No] :
Actions-> Cancel Edit
Select whether to enable traffic monitoring.
Use arrow keys to change field selection, <Space> to toggle field choices,
and <Enter> to go to Actions.
it by pressing the Space bar (or
move the cursor to the Monitoring Port parameter.
No
Enable mirroring by
setting this parameter
to "Yes".
Save Help
[E] (for Edit).
) to select Yes.
[Y]