Snmp Support - HP ProCurve 6120G/XG Configuration Manual

ProCurve(config)# show lldp info local-device a1
LLDP Local Port Information Detail
Port : A1
PortType : local
PortId : 1
PortDesc : A1
Port VLAN ID : 1
Figure 13-21. Example of Local Device LLDP Information
ProCurve(config)# show lldp info remote-device a1
LLDP Remote Device Information Detail
Local Port : A1
ChassisType : mac-address
ChassisId : 00 16 35 22 ca 40
PortType : local
PortId : 1
SysName : esp-dback
System Descr : ProCurve Switch, revision Z.14.01, ROM ...
PortDescr : A1
System Capabilities Supported
System Capabilities Enabled
Port VLAN ID : 200
Remote Management Address
Type : ipv4
Address : 192.168.1.1
Figure 13-22. Example of Remote Device LLDP Information

SNMP Support

The LLDP-EXT-DOT1-MIB has the corresponding MIB variables for the Port
VLAN ID TLV. The TLV advertisement can be enabled or disabled using the
MIB object lldpXdot1ConfigPortVlanTxEnable in the
lldpXdot1ConfigPortVlanTable.
The information that LLDP used in its
advertisement.
: bridge, router
: bridge, router
Configuring for Network Management Applications
LLDP (Link-Layer Discovery Protocol)
13-61