HP ProCurve 6120G/XG Configuration Manual page 89

ProCurve(config)# show int custom 1-4 port name:4 type vlan intrusion speed
enabled mdi
Status and Counters - Custom Port Status
Port Name
---- ---------- ---------- ----- --------- ------- ------- --------
1 Acco
2 Huma
3 Deve
4 Lab1
ProCurve(config)# alias sic "show int custom 1-4 port name:4 type vlan intrusion
speed enabled mdi"
ProCurve(config)#
ProCurve(config)# sic
Status and Counters - Custom Port Status
Port Name
---- ---------- ---------- ----- --------- ------- ------- --------
1 Acco
2 Huma
3 Deve
4 Lab1
Figure 4-12. Example of Using the Alias Command with show int custom
N o t e
Remember to enclose the command being aliased in quotes.
Command parameters for the aliased command can be added at the end of the
alias command string. For example:
ProCurve(config)# alias sc "show config"
ProCurve(config)# sc status
To change the command that is aliased, re-execute the alias name with new
command options. The new options are used when the alias is executed.
To display the alias commands that have been configured, enter the show alias
command.
Intrusion
Type VLAN Alert
100/1000T 1 No
100/1000T 1 No
100/1000T 1 No
100/1000T 1 No
Intrusion
Type VLAN Alert
100/1000T 1 No
100/1000T 1 No
100/1000T 1 No
100/1000T 1 No
Using the Command Line Interface (CLI)
CLI Control and Editing
Speed Enabled MDI-mode
1000FDx Yes Auto
1000FDx Yes Auto
1000FDx Yes Auto
1000FDx Yes Auto
Speed Enabled MDI-mode
1000FDx Yes Auto
1000FDx Yes Auto
1000FDx Yes Auto
1000FDx Yes Auto
4-19