Configuring The Switch; Introduction; Configuration Steps - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Reference Manual
Hp 1:10gb ethernet bl-c switch for c-class bladesystem browser-based interface reference guide
Hide thumbs
Also See for 438031-B21 - 1:10Gb Ethernet BL-c Switch:
- Command reference manual (208 pages) ,
- Application manual (195 pages) ,
- Cli reference manual (190 pages)
Table of Contents
Advertisement
Configuring the switch
Introduction
The switch BBI can be used to view and change switch configuration parameters. The same configuration
parameters that are available through the switch's command-line interface are present on the BBI
configuration forms.
The following provides a basic outline for switch configuration. You should first be familiar with
configuration as covered in the HP 1:10Gb Ethernet BL-c Switch Command Reference.
IMPORTANT:
configuration settings.
Configuration steps
Follow these basic steps for viewing or configuring switch parameters:
1.
Select the Configure context button in the toolbar.
2.
Select a feature icon in the navigation window. For example:
You must be logged in using the administrator account in order to change switch
Configuring the switch
136
Advertisement
Table of Contents
