HP ProCurve 6120G/XG Configuration Manual page 203

Procurve series 6120 blade switches management and configuration guide
Hide thumbs Also See for ProCurve 6120G/XG:
Table of Contents

Advertisement

ProCurve(config)# ip source-interface radius address 10.10.10.2
ProCurve(config)# show ip source-interface radius
Source-IP Configuration Information
Protocol | Admin Selection Policy
-------- + ----------------------- -------------- ---------------
Radius
| Configured IP Address
Figure 8-11. Example of a Specific IP Address Assigned for the RADIUS Application Protocol
In figure 8-12, a VLAN interface (VLAN 22) is specified as the source IP address
for TACACS. The administrative policy is Configured IP Interface.
ProCurve(config)# ip source-interface tacacs vlan 22
ProCurve(config)# show ip source-interface tacacs
Source-IP Configuration Information
Protocol | Admin Selection Policy
-------- + ----------------------- -------------- ---------------
Tacacs
| Configured IP Interface vlan 22
Figure 8-12. Example of Using a VLAN Interface as the Source IP Address for TACACS
Figure 8-13 shows a VLAN interface being specified as the source IP address
for logging. The administrative policy is Configured IP Interface.
ProCurve(config)# ip source-interface syslog vlan 10
ProCurve(config)# show ip source-interface syslog
Source-IP Configuration Information
Protocol | Admin Selection Policy
-------- + ----------------------- -------------- ---------------
Syslog
| Configured IP Interface vlan 10
Figure 8-13. Example of Using a VLAN Interface as the Source IP Address for Logging (Syslog)
Configuring a Single Source IP Address
IP Interface
IP Address
vlan 3
10.10.10.2
IP Interface
IP Address
10.10.10.4
IP Interface
IP Address
10.10.10.10
Configuring IP Addressing
8-23

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 6120xgProcurve 6120 series

Table of Contents