Iscsi Target Gateway Configuration Steps - HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

service. Table 74 provides a high-level overview of the commands and links to the sections that detail the
procedures. See the Fabric OS Command Reference for detailed information on the commands.
Table 74

iSCSI target gateway configuration steps

Step
1 Activate iSCSI for the HP
StorageWorks B-Series
iSCSI Director Blade.
2 Configure the IP address
for GbE ports.
3 Optional: Configure the
IP route for the GbE
ports.
4 (Easy) Automatically
map FC targets to iSCSI
targets and names
target with unique IQN.
5 (Advanced) Create
iSCSI virtual target.
6 Add LUNs to the virtual
target.
7 Create discovery
domains, where
members are iSCSI
components identified
using IQNs.
8 Create discovery
domain set, where
members are discovery
domains.
9 Activate the discovery
domain set.
10 Enter user name and
shared secret for
authentication (CHAP).
(optional)
1 1 Enable CHAP on the
iSCSI virtual target for
which you want
authentication.
(Optional)
12 Bind specific user names
to iSCSI virtual targets to
control access.
(optional)
13 Commit configuration
(Items configured in
steps 4-9).
14 Create the iSCSI FC
zone.
15 Add iSCSI FC zone to
zone configuration.
Command
fosConfig - -enable iscsi
portCfg ipif <slot>/ge<port>
create <ipaddress> <netmask>
<mtu_size>
portCfg iproute
<slot>/ge<port> args
iscsiCfg - -easycreate tgt
iscsiCfg - -create tgt –t
<targetname>
iscsiCfg - -add lun -t
<targetname> \
-w <fcwwn> -l <LUN_map>
iscsiCfg - -create dd -d
<ddname> \
-m
"<member>,<member>,<member>,..
."
iscsiCfg - -create ddset -n
<ddset_name> \
-d "<member>,<member>,..."
iscsiCfg - -enable ddset –n
<ddset_name>
iscsiCfg - -create auth -u
<uname>\
-s <secret>
iscsiCfg - -modify tgt \
–t <target name> –a CHAP
iscsiCfg - -addusername tgt \
–t <target name> -u <user name>
iscsiCfg - -commit all
zoneCreate "<zonename>",
"<member>,<member>,..."
cfgAdd "cfgname", "zone1,
zone2"
Procedure
"Enabling the iSCSI gateway
service" on page 309
"Configuring the GbE
interface" on page 31 1
"Configuring the GbE
interface" on page 31 1
"Automatic iSCSI VT creation"
on page 312
"Manual iSCSI VT creation"
on page 315
"Creating discovery domains"
on page 319
"Creating and enabling a
discovery domain sets" on
page 320
"Creating and enabling a
discovery domain sets" on
page 320
"Setting the user name and
shared secret" on page 320
"Setting the user name and
shared secret" on page 320
"Binding user names to an
iSCSI VT" on page 321
"Committing the iSCSI-related
configuration" on page 322
"Creating an iSCSI FC zone"
on page 325
"Creating an iSCSI FC zone"
on page 325
Fabric OS 6.2 administrator guide 307