HP ProCurve 6120G/XG Configuration Manual page 62

Using the Menu Interface
Main Menu Features
■
■
■
■
■
3-8
Command Line (CLI): Selects the Command Line Interface at the same
level (Manager or Operator) that you are accessing in the Menu interface.
(Refer to Chapter 4, "Using the Command Line Interface (CLI)".)
Reboot Switch: Performs a "warm" reboot of the switch, which clears
most temporary error conditions, resets the network activity counters to
zero, and resets the system up-time to zero. A reboot is required to activate
a change in the VLAN Support parameter. (See "Rebooting from the Menu
Interface" on page 6-11.)
Download OS: Enables you to download a new switch software version
to the switch. (See Appendix A, "File Transfers".)
Run Setup: Displays the Switch Setup screen for quickly configuring
basic switch parameters such as IP addressing, default gateway, logon
default interface, and others. (Refer to the Installation and Getting
Started Guide for your switch.)
Logout: Closes the Menu interface and console session, and disconnects
Telnet access to the switch. (See "How to End a Menu Session and Exit
from the Console" on page 3-5.)