ProCurve(config)# show sntp
SNTP Configuration
SNTP Authentication : Enabled
Time Sync Mode: Sntp
SNTP Mode : Unicast
Poll Interval (sec) [720] : 720
Priority SNTP Server Address
-------- ---------------------------------------
1
10.10.10.2
2
fe80::200:24ff:fec8:4ca8
Figure 9-14. Example of SNTP Configuration Information
To display all the SNTP authentication keys that have been configured on the
switch, enter the show sntp authentication command.
ProCurve(config)# show sntp authentication
Figure 9-15. Example of show sntp authentication Command Output
To display the statistical information for each SNTP server, enter the sntp
statistics command. The number of SNTP packets that have failed authentica
tion is displayed for each SNTP server address.
SNTP Authentication Information
SNTP Authentication : Enabled
Key-ID
Auth Mode
------- ---------- --------
55
MD5
10
MD5
SNTP: Viewing, Selecting, and Configuring
Protocol Version KeyId
---------------- -----
3
3
Trusted
Yes
No
Time Protocols
55
55
9-23