Application Server Commands - HP ProCurve 6120G/XG Configuration Manual

Application Server Commands

Application servers (as described in OOBM and Server Applications in the
Concepts section above) have added a
options to specify which interface(s) is(are) active.
Default value is both for all servers.
For example:
Telnet:
telnet-server [listen <oobm | data | both>]
Management and Configuration Guide, page 7-6
SSH:
ip ssh [listen <oobm | data | both>]
Access Security Guide, page 5-14
SNMP:
snmp-server [listen <oobm | data | both>]
Management and Configuration Guide, page 13-35
TFTP:
tftp server [listen <oobm | data | both>]
Management and Configuration Guide, page A-9
HTTP: web-management [listen <oobm | data | both>]
Management and Configuration Guide, page 7-8
In all cases, show running-config
Use the no form of the command to prevent the server from running on either
interface. For example:
Telnet:
no telnet-server
SSH:
no ip ssh
SNMP:
no snmp-server
TFTP:
no tftp server
HTTP: no web-management
Network Out-of-Band Management (OOBM)
listen keyword with
will display the server configurations.
Tasks
oobm|data|both
G-13