How Ip Addressing Affects Switch Operation - HP ProCurve 6120G/XG Configuration Manual

3. If you need further information on using the web browser interface, click

How IP Addressing Affects Switch Operation

Without an IP address and subnet mask compatible with your network, the
switch can be managed only through a direct terminal device connection to
the OA console connection or the USB serial console. You can use direct-
connect console access to take advantage of features that do not depend on
IP addressing. However, to realize the full capabilities ProCurve proactive
networking offers through the switch, configure the switch with an IP address
and subnet mask compatible with your network. The following table lists the
general features available with and without a network-compatible IP address
configured.
Table 8-1. Features Available With and Without IP Addressing on the Switch
Features Available Without an IP Address
• Direct-connect access to the CLI and the menu
interface.
• DHCP or Bootp support for automatic IP address
configuration, and DHCP support for automatic Timep
server IP address configuration
• Multiple Spanning Tree Protocol
• Port settings and port trunking
• Console-based status and counters information for
monitoring switch operation and diagnosing problems
through the CLI or menu interface.
• VLANs and GVRP
• Serial downloads of software updates and
configuration files (Xmodem)
• Link test
• Port monitoring
• Password authentication
• Quality of Service (QoS)
• Authorized IP manager security
on [?] to access the web-based help available for the switch.
Additional Features Available with an IP Address and
Subnet Mask
• Web browser interface access, with configuration,
security, and diagnostic tools, plus the Alert Log for
discovering problems detected in the switch along
with suggested solutions
• SNMP network management access such as
ProCurve Manager for network configuration,
monitoring, problem-finding and reporting, analysis,
and recommendations for changes to increase control
and uptime
• TACACS+, RADIUS, SSH, SSL, and 802.1X
authentication
• Multinetting on VLANs
• Telnet access to the CLI or the menu interface
• IGMP
• TimeP and SNTP server configuration
• TFTP download of configurations and software
updates
• Radius
• Ping test
Configuring IP Addressing
IP Configuration
8-11