HP ProCurve 6120G/XG Configuration Manual page 618

Daylight Savings Time on ProCurve Switches
Middle Europe and Portugal:
Southern Hemisphere:
Western Europe:
A sixth option named "User defined" allows you to customize the DST config­
uration by entering the beginning month and date plus the ending month and
date for the time change. The menu interface screen looks like this (all month/
date entries are at their default values):
===========================- TELNET - MANAGER MODE -============================
Actions-> Cancel
Edit the fields displayed above.
Use arrow keys to change action selection and <Enter> to execute action.
Figure F-1. Menu Interface with "User-Defined" Daylight Time Rule Option
F-2
• Begin DST at 2am the first Sunday on or after March 25th.
• End DST at 2am the first Sunday on or after September 24th.
• Begin DST at 2am the first Sunday on or after October 25th.
• End DST at 2am the first Sunday on or after March 1st.
• Begin DST at 2am the first Sunday on or after March 23rd.
• End DST at 2am the first Sunday on or after October 23rd.
Switch Configuration - System Information
System Name : ProCurve 6120 Blade Switch
System Contact :
System Location :
Inactivity Timeout (min) [0] : 0 MAC Age Time (sec) [300] : 300
Inbound Telnet Enabled [Yes] : Yes Web Agent Enabled [Yes] : Yes
Time Sync Method [None] : TIMEP
TimeP Mode [Disabled] : Disabled
Tftp-enable [Yes] : Yes Jumbo Max Frame Size [9216] : 9216
Time Zone [0] : 0
Daylight Time Rule [None] : User-defined
Beginning month [April] : April
Ending month [October] : October
Edit Save
Select User-defined and press [v] to
display the remaining parameters.
Beginning day [1] : 1
Ending day [1] : 1
Help