HP ProCurve 6120G/XG Configuration Manual page 60

Using the Menu Interface
Starting and Ending a Menu Session
Asterisk indicates a
configuration change
that requires a reboot
to activate.
Figure 3-2. Example Indication of a Configuration Change Requiring a Reboot
1. In the current session, if you have not made configuration changes that
2. If you have made configuration changes that require a switch reboot—
3. Exit from the terminal program, turn off the terminal, or close the Telnet
3-6
require a switch reboot to activate, return to the Main Menu and press
(zero) to log out. Then just exit from the terminal program, turn off the
terminal, or quit the Telnet session.
that is, if an asterisk (*) appears next to a configured item or next to Switch
Configuration in the Main Menu:
a. Return to the Main Menu.
b. Press to select Reboot Switch and follow the instructions on the
[6]
reboot screen.
Rebooting the switch terminates the menu session, and, if you are using
Telnet, disconnects the Telnet session.
(See "Rebooting To Activate Configuration Changes" on page 3-13.)
application program.
[0]