ProCurve(config)# show snmp-server
SNMP Communities
Community Name
---------------- -------- ------------
public
Trap Receivers
Link-Change Traps Enabled on Ports [All] : All
...
Excluded MIBs
Snmp Response Pdu Source-IP Information
Selection Policy
Trap Pdu Source-IP Information
Selection Policy
Ip Address
Figure 13-11. Display of Source IP Address Configuration
Displaying SNMP Notification Configuration
Use the show snmp-server command to display the currently configured:
■
■
■
Syntax: show snmp-server
MIB View Write Access
Manager
Unrestricted
: dstIpOfRequest
: Configured IP
: 10.10.10.10
Management stations (trap receivers)
Settings for network security notifications and link-change traps
SNMP communities
Displays the currently configured notification settings for
versions SNMPv1 and SNMPv2c traps, including SNMP
communities, trap receivers, link-change traps, and network
security notifications.
Configuring for Network Management Applications
Using SNMP Tools To Manage the Switch
dstIpOfRequest: The
destination IP address of
the interface on which
an SNMP request is
received i s used as the
source IP address in
SNMP replies.
13-33