Debug Destinations - HP ProCurve 6120G/XG Configuration Manual

ip [ rip < database | event | trigger > ]
rip < database | event | trigger > > — Enables the specified RIP
message type for the configured destination(s).
database— Display database changes.
event— Display RIP events.
trigger— Display trigger messages.
ipv6
[dhcpv6-client [events | packet ]]
[forwarding | nd | packet]
When no debug options are included, displays debug
messages for all IPv6 debug options.
dhcpv6-client [events | packet]: Displays DHCPv6 client event
and packet data.
[forwarding]: Displays IPv6 forwarding messages.
[nd]: Displays debug messages for IPv6 neighbor discovery.
[packet]: Displays IPv6 packet messages.
lldp
Enables all LLDP message types for the configured destina­
tions.

Debug Destinations

Use the debug destination command to enable (and disable) Syslog messaging
on a Syslog server or to a CLI session for specified types of debug and Event
Log messages.
Syntax: [no] debug destination < logging | session | buffer | debug-console>
logging
Enables Syslog logging to configured Syslog servers so that
the debug message types specified by the debug <debug-type>
command (see "Debug Messages" on page C-44) are sent.
(Default: Logging disabled)
To configure a Syslog server IP address, refer to "Config­
uring a Syslog Server" on page C-48.
Troubleshooting
Debug/Syslog Operation
C-45