Table of Contents
Advertisement
62
en | Using the IP Interface
11
Using the IP Interface
The HD Conference Dome transmits PTZ control commands and
images over a TCP/IP network. It also allows users to configure
the camera display settings, camera operating settings, and to
configure the network parameters.
The HD Conference Dome incorporates a network video server
in the IP module. The primary function of the server is to
encode video and control data for transmission over a TCP/IP
network. The use of existing networks means that integration
with local networks can be achieved quickly and easily.
Refer to Section 16 BVIP Firmware Updates, page 154, for
firmware upgrade instructions.
11.1
Overview of Features
The HD Conference Dome includes the following functionality:
Function
Video Encoding
Streaming
Multicast
Configuration
F.01U.265.806 | 1.0 | 2012.03
Description
The camera uses the H.264 compression standards and
ensures that the data rate remains low even with high
image quality and can also be adapted to local
conditions within wide limits.
Encodes multiple data streams simultaneously
according to individually customized profiles. This
feature creates data streams that can serve different
purposes. For example, one (1) data stream for local
recording and one (1) data stream optimized for
transmission over the Local Area Network (LAN).
Enables simultaneous, real-time transmission to
multiple receivers. The network must implement the
UDP and IGMP V2 protocols as a prerequisite for
Multicasting.
Allows configuration for all camera settings from a Web
browser on the local network (Intranet) or on the
Internet. You can also update the firmware, load device
configurations, store configuration settings, and copy
these settings from one camera to another.
Installation Manual
HD Conference Dome
Bosch Security Systems, Inc.
Advertisement
Table of Contents
