Configuring Netbios Over Vpn; Creating And Managing Pptp Users - Cisco RV110W Administration Manual

Configuring VPN
VPN Clients
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
STEP 1
Cisco RV110W Administration Guide
To configure the PPTP VPN service:
Choose VPN > VPN Clients.
Do the following:
PPTP Server
IP Address for PPTP
Server
IP Address for PPTP
Clients
MPPE Encryption
Click Save.

Configuring NetBIOS Over VPN

To enable NetBIOS over VPN:
In the NetBIOS over VPN field, check the box to allow NetBIOS broadcasts to
travel over the VPN tunnel. By default, the NetBIOS feature is available to client
policies.
Click Save.

Creating and Managing PPTP Users

To create PPTP users:
In the VPN Client Setting Table, click Add Row.
Check to enable the PPTP server.
Enter the IP address of the PPTP server.
Enter the IP address range of PPTP clients.
Check the Enable box to enable MPPE encryption.
Microsoft Point-to-Point Encryption (MPPE) is used
when users set up and use a PPTP VPN client to
connect to the Cisco RV110W.
5
97