Cisco RV110W Administration Manual page 51

Configuring Networking
Configuring IPv6
STEP 3
STEP 1
STEP 2
Cisco RV110W Administration Guide
Server Preference
Static DNS 1
Static DNS 2
Client Lease Time
Click Save.
Configuring IPv6 Address Pools
You can define the IPv6 delegation prefix for a range of IPv6 addresses to be
served by the Cisco RV110W DHCPv6 server.
Using a delegation prefix, you can automate the process of informing other
networking equipment on the LAN of DHCP information specific for the assigned
prefix.
To configure IPv6 Address Pools:
Choose Networking > IPv6 > IPv6 LAN Configuration.
In the IPv6 Address Pools Table, click Add Row.
Enter the server preference level of this DHCP
server.
DHCP advertise messages with the highest server
preference value to a LAN host are preferred over
other DHCP server advertise messages.
The default is 255.
Enter the IPv6 address of the primary DNS server
on the ISP IPv6 network.
Enter the IPv6 address of the secondary DNS
server on the ISP IPv6 network.
Enter the client lease time.
Enter the duration (in seconds) for which IPv6
addresses are leased to endpoints on the LAN.
2
51