Configuring L2Tp - Cisco RV110W Administration Manual

Configuring Networking
Configuring the WAN Settings
STEP 4
STEP 5
STEP 1
STEP 2
Cisco RV110W Administration Guide
Keep alive
Authentication Type
(Optional) To configure the optional settings, see
Click Save.

Configuring L2TP

To configure the L2TP settings:
Choose Networking > WAN.
From the Internet Connection Type drop-down menu, choose L2TP.
When you select this option, the Internet
connection is always on. In the redial period field,
enter the number of seconds after which the
Cisco RV110W attempts to reconnect if it is
disconnected.
Choose the authentication type:
Auto-negotiation—The server sends a
configuration request specifying the security
algorithm set on it. Then, the Cisco RV110W sends
back authentication credentials with the security
type sent earlier by the server.
PAP—The Cisco RV110W uses the Password
Authentication Protocol (PAP) to connect to the ISP.
CHAP—The Cisco RV110W uses the Challenge
Handshake Authentication Protocol (CHAP) when
connecting with the ISP.
MS-CHAP or MS-CHAPv2—The Cisco RV110W
uses Microsoft Challenge Handshake
Authentication Protocol when connecting with the
ISP.
Configuring Optional
2
Settings.
26