Configuring Routing; Configuring The Operating Mode; Configuring Dynamic Routing - Cisco RV110W Administration Manual

Configuring Networking

Configuring Routing

Configuring Routing
STEP 1
STEP 2
STEP 3
Cisco RV110W Administration Guide
Configure the routing options.

Configuring the Operating Mode

To configure the Cisco RV110W operating mode:
Choose Networking > Routing.
In the Operating Mode field, select one of the following options:
Gateway
Router
Click Save.

Configuring Dynamic Routing

Routing Information Protocol (RIP) is an Interior Gateway Protocol (IGP) that is
commonly used in internal networks. It allows the router to exchange its routing
information automatically with other routers, and allows it to dynamically adjust its
routing tables and adapt to changes in the network.
Dynamic Routing (RIP) enables the Cisco RV110W to automatically adjust to
physical changes in the network layout and exchange routing tables with the other
routers.
(Recommended) Click this button to set the
Cisco RV110W to act as a gateway.
Keep this default setting if the Cisco RV110W is
hosting your network connection to the Internet
and is performing the routing functions.
(For advanced users only) Click this button to set
the Cisco RV110W to act as a router.
Select this option if the Cisco RV110W is on a
network with other routers.
Enabling the Router mode disables NAT (Network
Address Translation) on the Cisco RV110W.
2
40