Configuring Inter-Vlan Routing - Cisco RV110W Administration Manual

Configuring Networking
Configuring Routing
STEP 1
STEP 2
STEP 3
STEP 4
Cisco RV110W Administration Guide
To configure static routing:
Choose Networking > Routing.
From the Route Entries drop-down menu, choose a route entry.
To delete the route entry, click Delete This Entry.
Configure the following settings for the selected route entry:
Enter Route Name
Destination LAN IP
Subnet Mask
Gateway
Interface
Click Save.

Configuring Inter-VLAN Routing

Check the Inter-VLAN Routing box to enable routing between the separate VLANs
on the Cisco RV110W.
Enter the name of the route.
Enter the IP address of the destination LAN.
Enter the subnet mask of the destination network.
Enter the IP address of the gateway used for this
route.
Select the interface to which packets for this route
are sent:
• LAN & Wireless—Click this button to direct packets
to the LAN and wireless network.
• Internet (WAN)—Click this button to direct packets
to the Internet (WAN).
2
42