Configuring Quickvpn; Configuring Netbios Over Vpn; Creating And Managing Pptp Users - Cisco RV215W Administration Manual

Configuring VPN
VPN Clients
STEP 3
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
STEP 1
Cisco RV215W Wireless-N VPN Firewall Administration Guide
IP Address for PPTP
Clients
MPPE Encryption
Click Save.

Configuring QuickVPN

Add the QuickVPN users on the VPN > VPN Clients page. See
Client Settings and Creating and Managing QuickVPN
Instruct users to obtain the free Cisco QuickVPN software from Cisco.com, and
install it on their computers. See
To enable access using Cisco QuickVPN on your device, you must enable remote
management to open port 443 for SSL. See

Configuring NetBIOS over VPN

To enable NetBIOS over VPN:
In the NetBIOS over VPN field, check the box to allow NetBIOS broadcasts to
travel over the VPN tunnel. By default, the NetBIOS feature is available to client
policies.
Click Save.

Creating and Managing PPTP Users

To create PPTP users:
In the VPN Client Setting Table, click Add Row.
Enter the IP address range of PPTP clients.
Check the Enable box to enable MPPE encryption.
Microsoft Point-to-Point Encryption (MPPE) is used
when users set up and use a PPTP VPN client to
connect to the device.
Using the Cisco QuickVPN Software
Configuring Basic Firewall
9
Importing VPN
Users.
Settings.
102