Administering Your Cisco RV110W
Configuring Logging
STEP 1
STEP 2
STEP 3
STEP 4
Cisco RV110W Administration Guide
Configuring the E-Mailing of Logs
You can configure the Cisco RV110W to send logs by email. We recommend that
you set up a separate email account for sending and receiving logs.
You must first set up the severity of logs you want to capture; see
Logging
Settings.
To configure the e-mailing of logs:
Choose Administration > Logging > E-mail Settings.
To enable the e-mailing of log events, check Enable.
The minimum email log severity of logs you want to capture appears. To change
this, click Configure Severity.
Configure the following settings:
E-mail Server Address
E-mail Server Port
Return E-mail Address
Send to E-mail
Address (1)
Send to E-mail
Address (2) (Optional)
Send to E-mail
Address (3) (Optional)
E-mail Encryption (SSL)
Enter the address of the SMTP server. This is the
mail server associated with the email account
you've setup (for example,
mail.companyname.com
Enter the SMTP server port. If your email provider
requires a special port for email, enter it here.
Otherwise, use the default (25).
Enter the return email address that the
Cisco RV110W will send messages to if logs from
the router to the send-to email address are
undeliverable.
Enter an email address to which to send logs (for
logging@companyname.com
example,
Enter an additional email address to which to send
logs.
Enter an additional email address to which to send
logs.
To enable email encryption, check Enable.
Configuring
).
).
7
126