Cisco RV110W Administration Manual page 27

Configuring Networking
Configuring the WAN Settings
STEP 3
Cisco RV110W Administration Guide
Enter this information:
Internet IP Address
Subnet mask
Default Gateway
L2TP Server
Username
Password
Connect on Demand
Enter the IP address of the WAN port.
Enter subnet mask of the WAN port.
Enter the IP address of the default gateway.
Enter the IP address of the L2TP server.
Enter your username assigned to you by the ISP.
Enter your password assigned to you by the ISP.
Select this option if your ISP charges based on the
amount of time that you are connected. When you
select this option, the Internet connection is on only
when traffic is present. If the connection is idle—
that is, no traffic is flowing—the connection is
closed. If you click Connect on Demand, enter the
number of minutes after which the connection
shuts off in the Max Idle Time field.
2
27