Administering Your Cisco RV110W
Restarting the Cisco RV110W
Restarting the Cisco RV110W
STEP 1
STEP 2
Restoring the Factory Defaults
!
CAUTION
STEP 1
STEP 2
Running the Setup Wizard
STEP 1
STEP 2
Cisco RV110W Administration Guide
To restart the router:
Choose Administration > Reboot.
Click Reboot.
During a restore operation, do not try to go online, turn off the router, shut down the
PC, or use the router until the operation is complete. This should take about a
minute. When the test light turns off, wait a few more seconds before using the
router.
To restore factory defaults to the router:
Choose Administration > Restore Factory Defaults.
Click Default.
To run the Setup Wizard:
Choose Administration > Setup Wizard.
Follow the online instructions.
7
134